A periodic electrical safety inspection and verification record — supply and main switchboard, RCDs, wiring, earthing and accessories — aligned to AS/NZS 3019, with a satisfactory / unsatisfactory result and space for defects.
A periodic electrical safety inspection and verification record — supply and main switchboard, RCDs, wiring, earthing and accessories — aligned to AS/NZS 3019, with a satisfactory / unsatisfactory result and space for defects.
This record is typically used for periodic inspections. The required frequency or trigger depends on the installation, its use and any applicable standard or scheme / manufacturer requirements — record the date and any next-due date on the form.
Electrical installation, testing and inspection work must be carried out by a licensed electrician (some tasks need extra accreditation — for example CEC accreditation for solar). Test-and-tag may be done by a competent person under AS/NZS 3760. Record the technician's name and licence number on the form.
No. This is a free, practical record template aligned to the requirements of AS/NZS 3019. It is not a copy of the published standard and does not replace it — Australian Standards are copyright to Standards Australia. Always work to the current edition of AS/NZS 3019 and your state or territory's requirements.
This is a general template aligned to the requirements of AS/NZS 3019. It is provided as a guide only and is not a substitute for the published standard or manufacturer instructions. Always work to the current edition of the relevant standard and your jurisdiction's requirements, and have routine service carried out by a competent, appropriately licensed person.
traqR auto-schedules recurring electrical installation service, captures photos and defects on site, and stores every record for audit. Try it free for 14 days.