A switchboard inspection and condition assessment — enclosure and mounting, protective devices, terminations, labelling and thermal / condition checks — with defects, a risk rating and recommendations.
A switchboard inspection and condition assessment — enclosure and mounting, protective devices, terminations, labelling and thermal / condition checks — with defects, a risk rating and recommendations.
This record is typically used for periodic inspections. The required frequency or trigger depends on the installation, its use and any applicable standard or scheme / manufacturer requirements — record the date and any next-due date on the form.
Electrical installation, testing and inspection work must be carried out by a licensed electrician (some tasks need extra accreditation — for example CEC accreditation for solar). Test-and-tag may be done by a competent person under AS/NZS 3760. Record the technician's name and licence number on the form.
No. This is a free, practical record template aligned to the requirements of AS/NZS 3000. It is not a copy of the published standard and does not replace it — Australian Standards are copyright to Standards Australia. Always work to the current edition of AS/NZS 3000 and your state or territory's requirements.
This is a general template aligned to the requirements of AS/NZS 3000. It is provided as a guide only and is not a substitute for the published standard or manufacturer instructions. Always work to the current edition of the relevant standard and your jurisdiction's requirements, and have routine service carried out by a competent, appropriately licensed person.
traqR auto-schedules recurring electrical switchboards service, captures photos and defects on site, and stores every record for audit. Try it free for 14 days.